Driveway SealingBrisbane — Clear Coat Protection That Keeps Your Driveway Looking Its Best

Most clear coat sealers on Brisbane driveways need reapplication every three to five years, depending on the product type and how much sun and traffic the surface gets. Penetrating sealers tend to last longer because they sit inside the concrete rather than on top, where foot and vehicle traffic wear them down. We recommend checking annually — if water stops beading on the surface, it’s time to reseal.

A penetrating sealer leaves virtually no visible change — your driveway will look exactly the same, just cleaner and protected. Film-forming sealers can add a subtle wet-look sheen that slightly deepens the colour of aggregate stones, which many homeowners prefer. We always apply a test patch in an inconspicuous area first so you can see the finish before we commit to the full driveway.

Yes, and we recommend it. New concrete should be sealed within 28 days of pouring, once it has completed its initial curing period. We use cure-and-seal products like Duram SealCure on fresh concrete, which aids the final curing process while providing immediate protection against staining during landscaping and construction. Sealing early prevents the stains and damage that are hardest to remove later.

Driveway sealing applies a clear, transparent coat that protects the concrete while preserving its natural look — you still see the aggregate, colour, and texture underneath. Driveway painting applies an opaque coloured coating that covers the surface entirely, giving you a uniform colour finish. Choose sealing if you like how your driveway looks and want to keep it that way. Choose painting if you want to change the colour or hide surface imperfections.

Absolutely. Replacing a damaged driveway costs tens of thousands of dollars, while sealing costs a fraction of that and extends the life of your concrete by years. In Brisbane’s climate, the combination of UV, moisture, and heat breaks down unsealed concrete faster than in most Australian cities. Sealing also makes your driveway far easier to clean — oil spills, tyre marks, and mould wipe off a sealed surface instead of absorbing permanently.

It depends on the driveway’s size, surface type and condition, how much cleaning and crack repair is needed, and whether you choose a penetrating or film-forming sealer. We inspect and test your driveway on site, then give you a fixed-price quote with a clear product recommendation and no hidden costs. Call 1300 580 435 for a free quote.

It depends on the sealer. Penetrating sealers are generally touch-dry within a few hours and fully cured within about 24 hours. Film-forming acrylics and polyurethanes usually need around 48 hours before vehicle traffic. Brisbane humidity can slow curing, so we’ll give you specific times for your job in your written aftercare guide.

Yes, it’s included. We pressure clean the whole driveway with a rotary surface cleaner, treat oil stains with an alkaline degreaser and repair cracks with flexible polyurethane filler. We then allow at least 24 hours to dry before sealing. Skipping this step traps dirt and moisture under the sealer and causes whitening.

A penetrating sealer, our usual choice for exposed aggregate, doesn’t create a slippery surface. Film-forming sealers add a sheen and can be slicker when wet. For steep driveways or areas that stay damp, ask about our driveway anti-slip coating.

Yes. First we identify the existing sealer, because applying an incompatible product over it causes peeling and delamination. If the old coating is failing, we strip it back by diamond grinding or with chemical strippers, then reseal. Proper preparation is what makes the new seal last.

Yes. We seal driveways across Brisbane, the Gold Coast, the Sunshine Coast, Ipswich, Logan and Caboolture.