We clean fences across Brisbane every week, and the biggest mistake we see is homeowners blasting timber palings with a high-pressure turbo nozzle — it shreds the grain and leaves the timber worse than before. Our approach matches the method to the material. Hardwood and treated pine fences get a dedicated soft wash using sodium hypochlorite and surfactant at around 1,500 PSI through a 25-degree fan tip, which lifts mould and algae without damaging the wood fibres. Colorbond and aluminium fences cop a gentle downstream application followed by a low-pressure rinse to avoid denting the sheeting. Rendered and block fences can handle more pressure, so we step up to 3,000 PSI with a surface cleaner attachment for an even, streak-free finish across the render coat.
's Trusted Fence Cleaning SpecialistsBrisbane
Licensed & Insured
Satisfaction Guarantee
10% Seniors Discount
Get Your Free Quote
We Set a New Standard in Exterior Cleaning
Complete Peace of Mind
Unmatched Results
State-of-the-Art Equipment
John Doe
Service Overview
We clean fences across Brisbane every week, and the biggest mistake we see is homeowners blasting timber palings with a high-pressure turbo nozzle — it shreds the grain and leaves the timber worse than before. Our approach matches the method to the material. Hardwood and treated pine fences get a dedicated soft wash using sodium hypochlorite and surfactant at around 1,500 PSI through a 25-degree fan tip, which lifts mould and algae without damaging the wood fibres. Colorbond and aluminium fences cop a gentle downstream application followed by a low-pressure rinse to avoid denting the sheeting. Rendered and block fences can handle more pressure, so we step up to 3,000 PSI with a surface cleaner attachment for an even, streak-free finish across the render coat.
What's Included
Every fence cleaning job includes a full pre-inspection where we check for loose palings, damaged Colorbond sheets, cracked render, and any areas where pressure needs to be dialled back. We pre-treat the entire fence with a biodegradable detergent solution tailored to the surface — timber gets a wood-safe mix, while masonry and metal get a stronger alkaline cleaner to cut through oxidation and biological growth. After the wash, we do a final walk-around with you to make sure every section is done properly. We also rinse down adjacent garden beds and paths so no chemical residue is left behind.
Surfaces We Clean
We handle every fence type you’ll find across Brisbane suburbs — from classic hardwood paling fences and treated pine lap-and-cap styles through to modern Colorbond steel, powder-coated aluminium slat fencing, and pool-compliant glass panels. Rendered block fences and retaining walls with a textured acrylic finish are common in newer estates, and we adjust our technique to avoid stripping the coating. We also clean lattice panels, post-and-rail fences, and those older brushwood or bamboo screens that need a very light touch to avoid pulling them apart.
Our Method (Soft Wash / Pressure Wash)
We start by wetting down surrounding plants and covering any sensitive areas. Next, we apply our pre-treatment solution and let it dwell for 10 to 15 minutes to break down mould, lichen, and grime at the root. We then wash each section methodically, working from the bottom up to prevent streaking, using the correct pressure setting and nozzle for that surface. Finally, we rinse everything down from top to bottom and do a quality check before packing up.
Why Brisbane Properties Need This
Brisbane’s subtropical humidity is the number one enemy of fences. From October through to March, the combination of warm temperatures, afternoon storms, and heavy dew creates perfect conditions for black mould, green algae, and lichen to take hold — especially on south-facing fence panels that never fully dry out. Timber fences left untreated in this climate can start to rot within a few years, and Colorbond panels build up a chalky oxidation layer that dulls the colour. Regular cleaning not only keeps your fence looking sharp but extends its lifespan significantly, saving you thousands compared to a full replacement.
Professional Exterior Cleaning & Pressure Washing Solutions
For Homes & Commercial Properties!
Pressure Cleaning
Gutter Cleaning
Commercial Services
House Washing
Roof Cleaning
Sealing & Painting
We clean fences across Brisbane every week, and the biggest mistake we see is homeowners blasting timber palings with a high-pressure turbo nozzle — it shreds the grain and leaves the timber worse than before. Our approach matches the method to the material. Hardwood and treated pine fences get a dedicated soft wash using sodium hypochlorite and surfactant at around 1,500 PSI through a 25-degree fan tip, which lifts mould and algae without damaging the wood fibres. Colorbond and aluminium fences cop a gentle downstream application followed by a low-pressure rinse to avoid denting the sheeting. Rendered and block fences can handle more pressure, so we step up to 3,000 PSI with a surface cleaner attachment for an even, streak-free finish across the render coat.
Trusted Brands We Use Every Day
See the difference we make through real, visible transformations.
How We Work With You
01. Get Your Free Quote
02. We Get to Work
03. 100% Happy
Our Clients Are Saying
Ready to Transform Your Property?
Get Your Free Quote
Frequently Asked Questions
How much does fence cleaning in Brisbane cost?
Fence cleaning in Brisbane typically starts from around $3 to $6 per linear metre depending on the height, material, and how much buildup is present. A standard residential property with 30 to 50 metres of fencing usually falls between $150 and $350. We provide a fixed quote upfront after seeing photos or inspecting the job — no surprises on your invoice.
Can you pressure clean a timber fence without damaging it?
Yes, but technique matters more than the machine. We use a soft wash method on timber fences — lower pressure around 1,500 PSI with the right fan tip and a pre-treatment solution that does the heavy lifting. High-pressure turbo nozzles will furr up the grain and can split older palings. Our operators are trained to read the timber and adjust on the spot so you get a clean fence without the damage.
How often should I get my fence cleaned in Brisbane?
In Brisbane’s subtropical climate, we recommend fence cleaning every 12 to 18 months. Fences on the south side of your property or near trees and garden beds tend to grow mould faster and may need attention annually. Regular cleaning prevents buildup from becoming permanent staining and keeps timber fences in good condition between oiling or staining treatments.
Will your cleaning chemicals harm my garden plants?
We take plant protection seriously on every job. Before we start, we wet down all adjacent garden beds and cover sensitive plants with tarps where needed. The detergents we use are biodegradable and break down quickly, but we still rinse everything thoroughly after the wash. In years of fence cleaning across Brisbane, we have never had a plant damage claim — it is something we are genuinely careful about.
Do you clean Colorbond fences?
Absolutely — Colorbond fence cleaning is one of our most common jobs in Brisbane. Over time, Colorbond panels develop a chalky oxidation layer and attract mould growth, especially in humid areas. We use a low-pressure wash with a gentle alkaline detergent that removes the grime and restores the original colour without scratching or denting the steel sheeting. The results are immediate and usually last well over 12 months.