Professional Graffiti Removal in Brisbane

We aim for same-day or next-day response for graffiti removal across Brisbane. Fast removal is important — the quicker graffiti is cleaned, the less chance it has to penetrate the surface and the less likely the same spot will be targeted again. Call us on 1300 580 435 as soon as you spot it and we will get there as fast as possible.

In many cases, yes. We use specialist chemical removers designed to dissolve aerosol paint and marker ink while leaving the underlying paint intact. Success depends on the type of paint underneath, its age and condition, and how long the graffiti has been there. We always do a test patch first. If the underlying paint will be affected, we will let you know upfront so you can decide whether to proceed or arrange a localised repaint instead.

If your property is in a graffiti-prone area, an anti-graffiti coating is a smart investment. Sacrificial coatings create a clear barrier that comes off with the graffiti during removal, then gets reapplied. Permanent coatings allow graffiti to be washed off repeatedly without reapplication. We can advise on the best option for your surface type and recommend coating applicators in Brisbane.

Many commercial property insurance policies cover graffiti removal as part of malicious damage provisions — check your policy or speak with your broker. We provide before-and-after photos, a written report and an itemised invoice that satisfy most insurance claim requirements. Some Brisbane councils also offer subsidies or free removal programs for eligible properties — it is worth checking with your local council.

Yes, but heritage surfaces require extra care. Sandstone, heritage brick and lime-mortar joints are softer and more porous than modern materials, so we use low-pressure application with gel-based removers specifically formulated for masonry. We avoid high-pressure washing on heritage surfaces to prevent erosion of the original face. If the building is heritage-listed, we recommend confirming any cleaning requirements with your heritage advisor before we start.

It depends on the size of the area, the surface (brick, render, painted, metal or glass), the type of graffiti and how long it’s been there. Older tags baked in by the sun take more work. Sending a few photos with your enquiry helps us quote quickly. You’ll get a clear price before we start. Call 1300 580 435.

Yes. Colorbond panels, metal cladding, roller shutters and security doors are surfaces we regularly clean graffiti from. Painted metal needs careful chemical selection so the graffiti comes off without dulling the factory finish, so we always test a small patch first.

Our goal is a clean, even finish that blends with the surrounding wall. On bare brick and block, we use solvent-based removers and pressure-wash paint out of the porous face and mortar joints. On render, we use gel removers at low pressure. Very old or porous tags can occasionally leave a faint shadow. If we think that’s likely, we’ll tell you after the test patch, before the full job.

We’d recommend against scrubbing, solvents or a hired pressure washer before calling a professional. DIY attempts often spread the paint deeper into porous surfaces, strip the paint underneath, or leave ghost marks that are harder to remove. Call us first; fast removal gets the best result.

Yes. We remove graffiti from strata fences, bin enclosures, entry walls and car parks. We can provide before-and-after photos for your committee or insurer, and add graffiti removal to your regular body corporate pressure washing schedule.

Yes. We remove graffiti across Brisbane, the Gold Coast, the Sunshine Coast, Ipswich, Logan and Caboolture, aiming for same-day or next-day response.